The water pipe valve at home is leaking, so it cannot be neglected, and it must be dealt with in time. In order to prevent large-scale water leakage in the future, causing damage to the home. So how to deal with valve leakage by yourself and simply? Now to share with you. What is the simple solution to valve leakage? Let’s take everyone to understand it.
1. If the water pipe valve is leaking, first confirm that the nut on the valve is loose and leaking. In this case, the easiest and most effective way to leak water is to twist the nuts on both sides by hand.
2. Because the valve has been used for a long time, the gasket inside is aging, which will cause the valve to leak. In this case, the easiest solution is to replace the gasket.
3. The pressure cover of the valve leaks. Due to the frequent use of the switch for a long time, the filling in the valve wears and leaks. The way to deal with this situation is to close the valve, remove the pressure cover of the valve, and then wind the slender cotton thread three to four times. Can. Finally, tighten the pressure shield with a wrench.
4. Use a wrench to clamp the hexagonal part of the big end of the valve, turn it counterclockwise, disassemble the valve, replace it with a new one, and turn it clockwise to tighten it.
5. If the ball valve at home is leaking, you can close the entire valve in advance, remove the screw and handle, wrap linen or rope or cotton thread on the connection between the small iron bar of the handle and the valve, and tighten the handle.
Causes and Solutions of Common Faults of Several Valves
A valve is a control component in a fluid delivery system, with functions such as cut-off, regulation, flow diversion, reverse flow prevention, pressure stabilization, flow diversion, or overflow pressure relief. Valves used in fluid control…
